Products

Note: To request a sample or a quotation on one of our products click here

MN5010HS Global Positioning System (GPS) Receiver Module is a complete 20-channel receiver with high sensitivity that measures only 10 x 10 x 2 mm. It features fast-acquisition hardware, integrated RF filtering, TCXO, reset circuit, real-time clock with on-board crystal, and an integrated LNA that allows operation with either active or passive antennas. The user needs only provide DC power and a GPS signal; the MN5010HS will output the navigation solution in the widely-used NMEA-0183 protocol or in SiRF binary protocol.

MN5020HS Smart Global Positioning System (GPS) Antenna Module is a complete 20-channel receiver with an integrated 18 x 18 mm patch antenna. With this highly integrated solution, the user needs only provide DC power and ground connections; the MN5020HS will output the navigation solution in the widely-used NMEA-0183 protocol or in SiRF binary protocol. It measures only 21 x 27 x 6 mm, and includes a convenient connector for electrical interface and four holes for easy mounting. The MN5020HS features fast-acquisition hardware, integrated RF filtering, TCXO, reset circuit, and a real-time clock with on-board crystal. It also has improved cold-start acquisition sensitivity of -145dBm

MN5515HS Global Positioning System (GPS) Receiver Module is a complete 20-channel receiver with improved cold-start acquisition sensitivity of -145dBm. Cold start acquisition sensitivity specifies the lowest signal level at which the receiver can get a valid position fix, versus tracking sensitivity, which only means the receiver can track the satellites, but cannot determine a position fix. It measures only 15 x 15 x 2.9 mm, and features fast-acquisition hardware, integrated RF filtering, TCXO, reset circuit, and a real-time clock with on-board crystal. The user needs only provide DC power and a GPS signal; the MN5515HS will output the navigation solution in the widely-used NMEA-0183 protocol or in SiRF binary protocol.

All extrusions, bonded fins, fan sinks, heat pipes, snapped fins and skived fins are manufactured to customer drawings.
Castings
CPU Coolers
Fan Sinks
Standard Pin Fin Heatsinks (see ThermoCool website for std sizes)
Custom & Standard Anodizing available
Custom Machining

ATX ( 1U high and Std Box style)
ATCA Strongbox, 3U, (up to 1,500W)
Battery Chargers (Li-Ion, LiFePO4, NiCd / NiMH, Pb)
Compact PCI (175 W to 600W)
Dc to Dc 50 watts to 100 watts
Desk top adapters
High density supplies, greater then 18W / cu in
Hot Swap, N+1, Current Sharing up to 2,000 watts
Micro TCA (up to 380W)
Open Frame Standards ranging from 5 watts to 500watts
Open Frame High Density 18w / cu in (365W in a 3 x 5, 160W in a 2 x 4)
Led Power Supplies (Led Drivers) Constant Current & Constant Voltage (up to 300W)
Medical approved power supplies (up to 400W)
Military Power Supplies, Airborne (EW, radar, guidance), Missiles (Ground-to-air, air-to-air, sea-to-air) , Shipboard systems & Unmanned Vehicles (UAV), very light weight pwr systems, 98% efficient, PFC, Wide Operating Temp Range -54C to 104C, Redundant, Hot Swap (N+1), High power density, High switching frequency, multiple output voltages (DC & AC, power supplies up to 25,000 watts.
POE (Power over Ethernet) Injector Adapters
Front End Rectified (600 watts to 4KW)
Telecom
U Channel (200W to 800W)
Wall Adapters
Custom designed power supplies to customer specifications in each category listed above

Contract manufacturing box builds
Contact manufacturing RF assemblies
Contract manufacturing pwb assemblies
Contract manufacturing System Test
Additional contract services available, such as;
- Complete ship to end customer services
- Inventory management services
- Repair & RMA services
- Special Testing, temp cycling, shock & vibration on entire box or pwb assemblies